Boyueda Scooter Adapter V2 for MTB Oil shock Designed by Pirate
Thanks to this simple adapter you will be able to install Oil MTB shock on the back, scooter will be way more stabe and you will be able to go faster than before 🙂 . What you need is Oil Shock like 125mm 2500lbs and my adapter. Here you can choose between these 2
It’s super easy to install.
Just remove old rear shock. On silver bottom spacer place big adapter
If you have V2 then between fork and silver washer add tiny washers and Do NOT FORGET to use grease on all moving parts including bolts.
on the top ( other side of the fork ) use 2 medium spacers
, tight all screws and good to go 🙂
Part List and Links
Free 3D Version > www.thingiverse.com/piratein3d/designs
DNM Shock 125mm 2500lbs www.aliexpress.com/item/32951315193.html
🍻🍕 Do you 💘 Pirate ⁉ and want to Support ‼ 🍕🍻 Banggod bit.ly/PirateBG ( buy what U like from link ) Ali s.click.aliexpress.com/e/_dUILQgR ( buy what U like from link ) 💰 www.patreon.com/pirateonpatreon Or just leave some positive comment and make my Day 🍕🍻