Better Chargin port for Escoot XT30 Mod instead of Dangerous Microphone port ! DIY Set
8,00 $ – 13,00 $ incl. VAT
Stock metal charging ports are SUPER DANGEROUS !, you have to change it to something much safer and here is my idea with XT30 connectors.
Why stock microphone charging port is so dangerous ?! 1st thing, it has metal shell so short circuit can be done any time!, There is no any insulator between power pins. That kind of connector is for microphones and should never be used as a charging port. It’s connected straight to battery so small short circuit and BIG battery can go literally BOOM
Why my charging port is easy to install and super safe to use ?!. I am using XT30 connector, simply The Best in it’s size . It can handle even 30A and it’s evem widely used for LIPO batteries ⚡My adapter is not electrical conductive . Fits perfect for almost all Escoots with stock Microphone port ?✌
If you choose Full Set Assembled you will get :
2x Printed Charging port scooter side , XT30 hot glued into printed adapter with soldered HQ silicone cables ( You will have to solder wires and check polarity
2x XT30 connector charger side soldered HQ silicone cables ( You will have to solder wires and check polarity )
2x Rubber Cover
If you choose Full Set you will get :
2x Printed Charging port
2x Rubber Cover
4x XT30 connector ( 2x Male & 2x Female )
6 x Shrink tube
1x Short Hot glue stick
If you choose Only Printed Parts you will get :
2x Printed Charging port
2x Rubber Cover
**use it at your own risk**
Here you can check how to install this DIY in your Evehicle
Better Chargin port for Escoot XT30 Mod instead of Dangerous Microphone port !
Video:
Specification: Better Chargin port for Escoot XT30 Mod instead of Dangerous Microphone port ! DIY Set
|
||||||
| Dimensions | ||||||
|---|---|---|---|---|---|---|
|
||||||
4 reviews for Better Chargin port for Escoot XT30 Mod instead of Dangerous Microphone port ! DIY Set
Add a review
Related Products
Motor Cooler for Laotie Ti30 Boyueda GUNAI GN54 & other similar Escooter
Foot Rest for Escoots like Laotie Ti30 T85 ES18 ES18 lite Boyueda
|
Pirate –
So far so good, I used like 10 sets of those and only one broke cause I tighten nut too much. I designed XT30 adapter very good so it should work for quite long time ???
Nicbone (verified owner) –
Nice little adaptors to swap old fashion mic style with newer xt30 connectors. Only downside is you need to glue the xt30 in the adaptor to keep the connector in place and seal the junction, otherwise it will fall inside (by pushing the charger in) or outside (by pulling out charger port) one day or the other.
Maybe an upgrade with a flange and locker would solve this easily and make it maintenance compatible.
Nice and unique product anyway.
Jerry –
I haven’t changed them yet. I haven’t got
my scooter yet hopefully in next wk or two, but If I change these out on the Laotie es19 will I still be able to use the charger that comes with the scooter
Logane (verified owner) –
This product is perfect and is absolutely not dangerous compared to the originals.
I really recommend !