MOTOR COOLER FOR LAOTIE TI30 BOYUEDA GUNAI GN54 & OTHER 3D print project

If you are pushing your Scoot to the limit then you can notice that motors are pretty hot, actually rear motor can be so hot that you are even not able to touch side shell ( as you can imagine it seriously decrease life span of the motor ). Temperature inside the motor can be even 3x higher then outside shell, so if you mount cooler and temperature drops for even 10C then inside can drops for even 30C.

This cooler is not super efficient due to closed rim design but still push much more air over motor shell to cool it down, compare to simple air flow without cooler.

You will need:
3x Screw Flat Head M4 30mm
3x Wide Washer M4
3x Small Washer M4
3x Spacer M4 10mm lenght x 7.2mm
Enjoy

How to install it: youtu.be/Z7wFd2KIE54

**** You are buying only STL files , you will have to print it by your self. This project CAN’T be sold without premission, if you want to sell it just send message to me, we can do agreement . This Digital product CAN NOT be refund due to it’s digital nature ****