Antispark Dual Loop key V2⚡ Safe switch for Escoots ebikes 3D Project

Loop Key is perfect Power Fail Safe switch for most Evehicles like Escoots / Ebikes / Esk8 because it’s mechanicall on/off switch. My version of Dual Loop key is prepeared fot Antispark Amass XT90s & XT30 connector.

Easy to use, just connect small XT30 connector with preinstalled resistor ( it will prevent from any spark ) , then connect XT90 connector and remove xt30.

Dual version will work for Very Long Time compare to single XT90 connector version where built in tiny resistor had lifespan around 50 power connections. This time Tiny Xt30 with resistor is taking first high current / high voltage shock.

When Loop key is useful:

• No more battery drain, cuz  Loop Key disconnect battery. Very usefull if your vehicle got Remote alarm which drain 24h battery.
• When you Mod your Evehicle , like changing Controller or battery.
• Trusting built in on/off switch into controllers is bad idea, especially if controller will damaged then it will not turn of power system.
• You can disconnect battery from other components anytime.

It will fit in to standard charging port hole (15mm) , like in Laotie Escoots series Es18/ES19/Ti30 , Boyueda and most of other scoots. To install this loop key you have to drill two holes in you frame by using 3.5mm drill bit and make 4mm / M4 thread , also you have to use lots of silicone as a seal.

Recommended Print setting for Nozzle 0.4mm : HQ PLA / PETG/ Nylon

Bolt & Nut : Layer Height 0.12mm x Extrusion width 0.355 mm

Other parts: Layer Height 0.16mm x Extrusion width 0.6 mm

You will need:

5x M4 22mm

1x M4 Flat Head 8mm

How to Install it: pirate.ac/dual-loop-key-safe-switch-for-escoots-ebikes-how-to-install-it/

**** You are buying only STL files , you will have to print it by your self. This project CAN’T be sold without premission, if you want to sell it just send message to me, we can do agreement . This Digital product CAN NOT be refund due to it’s digital nature ****